The cam feeder is suitable for the stamping line that requires high speed and high precision coil feeding.


Applicable Material

  • Material Thickness: 0.1 mm – 1.6 mm
  • Coil Width: <300mm
  • Types: Electrical steel (lamination steel, silicon steel, relay steel, transformer steel)


  • Feeding Length: 11.5 mm – 240 mm
  • Feeding Speed: up to 500SPM


Intermittent coil feeding by the cam drive. The upper feed roller is pressed by spring, the bottom feed roller is cam drive.

The feed roller release device is an eccentric cam, so the releasing angle can be adjusted from 0-180 degrees. The feeding length adjustment is handled by changing 2-4 gears.


Max. Coil Width150 mm200 mm300 mm
Material Thickness0.1-1.6 mm0.1-1.6 mm0.1-1.6 mm
Pass Line Height60-120 mm60-120 mm60-120 mm
Feeding Length11.5-240 mm11.5-240 mm11.5-240 mm
Feeding Angle180°180°180°
Release AngleAdjustableAdjustableAdjustable


Share it!