Zigzag feeder NCP is a servo feeder that feeds the material into the press machine with a simultaneous X-Y movement.
It can optimize metal material utilization.


Applicable Material

  • Material Thickness: 0.2-2.0 mm
  • Coil Width: 20mm to 200/300/400/500/600/800mm

Feeding Performance

  • Feeding Speed Max. 20 m/min
  • Zigzag Movement Speed Max. 30 m/min
  • Feeding Accuracy: ± 0.08 mm


NCP is one type of servo feeder, specially designed for blanking line and multi-stage stamping press feeding. It’s easy to operate and has high automation performance.

The zigzag feeder uses high-speed linear bearings, rails with special treatment, low noise, high wear resistance, low friction load, smooth movement speed.

It has 1 set of Mitsubishi PLC and 2 sets of Yaskawa servo system. One servo system controls the feeding, another servo system controls the zigzag movement.


Max. Coil Width200 mm300 mm400 mm500 mm600 mm800 mm
Strip Thickness0.2-2.0 mm0.2-2.0 mm0.2-2.0 mm0.2-2.0 mm0.2-2.0 mm0.2-2.0 mm
Roller ReleasePneumaticPneumaticPneumaticPneumaticPneumaticPneumatic
Feed Roll1/11/11/11/11/11/1
Max. Feed Length9999.99 mm9999.99 mm9999.99 mm9999.99 mm9999.99 mm9999.99 mm
Max. Feed Speed20m/min20m/min20m/min20m/min20m/min20m/min
Max. Zigzag Speed30m/min30m/min30m/min30m/min30m/min30m/min
Accuracy± 0.1 mm± 0.1 mm± 0.1 mm± 0.1 mm± 0.1 mm± 0.1 mm
Servo SystemYaskawaYaskawaYaskawaYaskawaYaskawaYaskawa


Share it!