Maintenance & Repair FAQs

Here are some Maintenance & Repair FAQs of the HE-machine. We’re a coil feeders manufacturer that provides a one-year free warranty and lifetime technical support. And the after-sales service includes Installation, On-site Training, Regular Security Checks, Spare Parts Repair, etc. To learn more about our after-sales service, please visit the web page: After-sales Service. For more FAQs, please visit the web page: FAQs.

 

Why the servo feeder feed the coil material back?

2020-07-22T11:57:25+08:00

If the servo feeder machine keeps feeding the steel strip back, please check if the upper roller is released when feeding the material, if yes, please reset the correct feeding angle.If the feeding angle is reset and works well, [...]

Why the servo feeder feed the coil material back?2020-07-22T11:57:25+08:00

Do your coil feed machines come with a warranty?

2020-07-17T07:17:38+08:00

Yes, our machines come with a 1-year warranty as standard. Also, the warranty time can extend according to specific equipment and customer requirements.

Do your coil feed machines come with a warranty?2020-07-17T07:17:38+08:00

What things need to be checked daily for a servo roll feeder machine?

2020-07-17T07:15:44+08:00

Check if all the screws parts are in good condition without loose.Check if the pneumatic tube is ok without leaking.Check if the water filter is dry, if no, please drain water away.Make sure the pressure regulator is setting right, [...]

What things need to be checked daily for a servo roll feeder machine?2020-07-17T07:15:44+08:00

What will cause the inaccurate feeding of the servo feeder? How to solve?

2020-07-22T11:46:16+08:00

Inaccuracy feeding occasionally happens in the metal coil feeding process. Various reasons caused the feeding accuracy problem, HE-machine summarized the leading causes and solutions for the inaccurate feed of NC servo feeder. UNEVEN FEED ROLLER PRESSURE The sheet [...]

What will cause the inaccurate feeding of the servo feeder? How to solve?2020-07-22T11:46:16+08:00
Go to Top