- Wszystkie
- FAQ dla firm
- Dostawa i instalacja FAQ
- Konserwacja i naprawa FAQ
- Ceny i zamówienia FAQ
- Najczęściej zadawane pytania techniczne
HE-machine akceptuje T/T płatności i LC w oczach.
For the coil feeding equipment that go LCL shipping, HE-machine will use plastic films wrap on the equiment, and then fix it into a wooden box.
For the large coil lines that go FCL shipment, HE-machine will fix each part with ropes on the shipping container and then wrapped them with plastic films.
For standard version decoiler, straightener or feeders, it needs 15-20days for manufacturing. But we usually have machines in stock. Please contact with our sales if you need the coil handling equipment urgently.
For compact coil lines or whole metal stamping lines, it needs 35-70 workdays depends on different specifications.
The possible reason is the main power cable of the hydraulic system has been reversed. If the motor is reversed, the hydraulic station will not work.
Any questions during the decoiler straightener feeder installation, please feel free to contact us at any time.
If the servo feeder machine keeps feeding the steel strip back, please check if the upper roller is released when feeding the material, if yes, please reset the correct feeding angle.
If the feeding angle is reset and works well, but still have the problem, please contact us directly for help.
Yes, our machines come with a 1-year warranty as standard. Also, the warranty time can extend according to specific equipment and customer requirements.
Yes. For sure, HE-machine welcomes our customers to visit the factory for field inspection. Our factory opens from 8:30 AM to 6:00 PM (Mon.-Sat.). Please contact us to make a visiting appointment.
We supply coil handling machines and also have good relationships with press machines and stamping die manufacturers. Please z nami, to discuss a suitable system proposal for your production line.
In the turnkey metal stamping line page, you will find the process reference and our previous customer cases.
We believe that we should choose the most suitable machines after understanding our customers’ application and needs. Some machines are multi-functional, but we don’t always recommend our customers go for the most expensive coil equipment. Sometimes, your applications do not require this. We will discuss the detailed coil feed solution with you and direct you to the best equipment.
Yes, HE-machine provides straightening tests for our customers. Please sent your coil or sheet material to our office, then we’ll send the test videos and the straightening performance report. Know more from our free technical consulting.
HE-machine first started as a coil feeder maintenance shop in 2002. Ten years later, in 2012, HE-machine opened the independent sales office in Shenzhen to manage the global business. Know more from our story.
HE-machine is a company that specializes in coil feed solutions. We supply complete coil feed lines as well as single coil handling equipment, such as uncoilers, straighteners, and feeders. For more details, please check the introduction of HE-machine company.
HE-machine has its factory that specialized in coil handling equipment. For better service, HE-machine also cooperates with press machines and stamping die manufacturers, to provide turnkey stamping solutions to our customers.
- Check if all the screws parts are in good condition without loose.
- Check if the pneumatic tube is ok without leaking.
- Check if the water filter is dry, if no, please drain water away.
- Make sure the pressure regulator is setting right, we suggest 3 kg/cm2
- Lubricate the transmission gears when needed (ISO VG320 ~ VG370)
- Make sure the extension wiring is ok.
- Check if the feeding rolls are clean, if no, please clean it immediately.
- Check the control panel, make sure the switch, light and monitor are in normal conditions.
- Make sure the solenoid valve is clean.
For more details about operation and maintenance of servo roll feeder machine, please contact us now.
Inaccuracy feeding occasionally happens in the metal coil feeding process. Various reasons caused the feeding accuracy problem, HE-machine summarized the leading causes and solutions for the inaccurate feed of NC servo feeder.
UNEVEN FEED ROLLER PRESSURE
The sheet metal coil will always be biased in one direction because of the uneven feed roller pressure, which will cause inaccurate feeding.
What Can Do: If the coil sheet always biased to the left, it means the pressure on the left is too large. At this time, turn the left pressure adjustment nut counterclockwise to reduce the left spring pressure until the material runs back to the correct position, or turn the right pressure adjustment nut clockwise to increase the right side spring pressure.
MATERIAL DEFORMATION
The soft material is easy to deform will also cause inaccurate feeding, such as copper, aluminum. Excessive pressure on the upper roller may cause elastic material deformation and bias. The coil sheet will sometimes go to the left side and sometimes go to the right side.
What Can Do: Please unplug the lower tube of the release air cylinder and fold it up. If the material is still deformed, please rotate the two pressure adjustment nuts counterclockwise to release the pressure. We must know your coil material kind before produce a servo feeder machine. Please confirm your coil feeding material with our sales before purchasing.
COIL MATERIAL UNEVEN OR BURRS
The thickness of the two sides of the material is different, or the article has grinding burrs, which will cause the article always to be biased to one side when feeding.
What Can Do: Adjust the pressure adjustment nut and change the inlet locating wheels to the inlet locating plates. Otherwise, we can only try to replace the materials.
MACHINING OR ASSEMBLY FAILURE
Wrong machine processing or assembly will also cause inaccurate feeding. This problem doesn’t happen in HE-machine servo feeders yet. But if any fault of our servo feeder, please contact us soon to solve the problem in time.
All the HE coil handling equipments are CE certified. Some of them have the test report from TUV or SGS, from previous inspections of other customers. If you need additional report, we may charge accordingly, contact us to know more.